+86-312-6792432 sales@milestonevalve.com

Domicile > Des produits > Vanne sphérique > Vanne à soupape en fonte

Des produits

Nouveaux produits

Vanne à soupape en fonte

La soupape à soupape en fonte est une soupape à étanchéité forcée.Par conséquent, lorsque la soupape est fermée, une pression doit être appliquée sur le disque pour forcer la surface d'étanchéité à ne pas fuir. Lorsque le fluide entre dans la vanne par le dessous du disque, la résistance que la force de commande doit surmonter est la force de frottement de la tige de vanne et de la garniture et la poussée générée par la pression du fluide. La force pour fermer la vanne est supérieure à la force pour ouvrir la vanne, donc Fonte Le diamètre de la tige de la vanne de la vanne à soupape doit être grand, sinon la tige de la vanne se pliera en cas de défaillance.

envoyer une demande

Description du produit

1. introduction deFonteGlobeValve

Fonteglobevalve is a forced-sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve from below the disc, the resistance that the operating force needs to overcome is the friction force of the valve stem and packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve, so FonteThe diameter of the valve stem of the globevalve should be large, otherwise the valve stem will bend up failure.

FonteGlobeValve

2. Parameters of FonteGlobeValve

Type de vanne	Fonteglobevalve
DN	DN10ï½žDN600
PNï¼ˆMPaï¼ ‰	1.6ï½ž16Mpa
Plage de température de conception	-15â „ƒï½ž200â„ ƒ
Type de connexion:	À brides
Type d'actionneur	Commande manuelle, actionneur pneumatique, hydraulique ou électrique
Milieu applicable	Eau, huile, gaz et divers milieux de corrosion

Des pièces de rechange	Matériel
Disque de protection du corps	Acier forgé, Fonte d'acier
Tige	Acier forgé, Fonte d'acier
Emballage	Graphite flexible, Graphite flexible amélioré, PTEE
Cale d'étanchéité	Graphite Flexiblo amélioré, acier inoxydable, PTFE

Visage d'étanchéité
13Cr,STL, PTFE, nylon, avec matériau du corps

3. Advantages of Fonteglobevalve

1) The structure of the Fonteglobevalve is simpler than that of the gate valve, and it is more convenient to manufacture and maintain.
2) La surface d'étanchéitéof Fonteglobevalve is not easy to wear and scratch, and the sealing performance is good. There is no relative sliding between the valve disc and the sealing surface of the valve body when opening and closing, so neither abrasion nor abrasion is serious. The sealing performance is good and the service life is long. .
3) When the Fonteglobevalve is opened and closed, the disc stroke is small, so the height of the shut-off valve is smaller than that of the gate valve, but the structure length is longer than that of the gate valve.
4) Fonteglobevalve has a large opening and closing moment, which is laborious and takes a long time.
5) The medium channel in the Fonteglobevalve is tortuous, the fluid resistance is large, and the power consumption is large.
6) When the nominal pressure of the medium flow direction of the Fonteglobevalve PN≤16MPa, the downstream flow is generally adopted, and the medium flows upward from the bottom of the valve flap; when the nominal pressure PN≥20MPa, the reverse flow is generally adopted, and the medium flows downward from the top of the valve flap. In order to increase the seal performance. When in use, the shut-off valve medium can only flow in one direction and cannot change the direction of flow.
7) The valve flap is often eroded when the Fonteglobevalve is fully opened.

FonteGlobeValve
4. FAQ

Balises actives: Robinet à soupape en fonte, fabricants, fournisseurs, usine, sur mesure, en stock, en vrac, échantillon gratuit, Chine, fabriqué en Chine, bon marché, prix bas, prix, liste de prix, devis, CE, qualité, durable, garantie d'un an